一、工廠光伏屋頂系統的種類

1、 Types of factory photovoltaic roof systems

工廠光伏屋頂有兩種主要類型：直接安裝和轉移安裝。在直接安裝中，太陽能光伏組件安裝在位于建筑物內的屋頂上，以更大程度地利用建筑物的內部空間。從轉移安裝的角度來看，太陽能光伏組件安裝在建筑物外部，例如花園、停車場或其他開放空間，以提高組件的效率。

There are two main types of factory photovoltaic roofs: direct installation and transfer installation. In direct installation, solar photovoltaic modules are installed on the roof inside the building to maximize the utilization of the building's internal space. From the perspective of transfer installation, solar photovoltaic modules are installed outside buildings, such as gardens, parking lots, or other open spaces, to improve the efficiency of the modules.

二、規劃安裝

2、 Planning installation

在安裝工廠光伏屋頂系統之前，有必須要考慮的幾個因素，例如設施的面積、形狀、建筑物的結構、安裝點的坡度、安裝和使用權限以及太陽能系統本身的功率和性能。規劃完安裝工作在開始之前，你需要做的是了解所有因素，以便確保你的工廠光伏屋頂系統對空間的更佳利用。

Before installing the factory photovoltaic rooftop system, there are several factors that must be considered, such as the area and shape of the facility, the structure of the building, the slope of the installation point, installation and usage permissions, and the power and performance of the solar system itself. After planning the installation work, before starting, what you need to do is understand all factors to ensure that your factory's photovoltaic rooftop system makes better use of space.

三、確定安裝位置

3、 Determine installation location

確定安裝位置是安裝工廠光伏屋頂的重要一步理想的安裝位置應滿足以下要求：屋頂應盡量堅固、干燥、清潔；太陽能組件應盡量避免被遮擋；太陽能發電系統應位于足夠安全的空間中。

Determining the installation location is an important step in installing the factory's photovoltaic roof. The most ideal installation location should meet the following requirements: the roof should be as strong, dry, and clean as possible; Solar modules should be avoided as much as possible from being obstructed; The solar power generation system should be located in a sufficiently safe space.

四、安裝太陽能組件

4、 Installing solar modules

安裝太陽能組件其實很容易，但有一點要注意：電纜應盡量短，且不受阻礙，方便維護和檢查。此外，太陽能模組的安裝位置應處于安全的距離，且組件的散熱機制需保持正常工作。

Installing solar panels is actually quite easy, but one thing to note is that the cables should be as short as possible, unobstructed, and easy to maintain and inspect. In addition, the installation position of the solar module should be at a safe distance, and the cooling mechanism of the components should be maintained in normal operation.

五、安裝控制系統

5、 Install control system

安裝太陽能控制系統是安裝工廠光伏屋頂的一步，也是重要的步驟。控制系統的主要作用是監控你的太陽能發電系統的整體性能，并實時傳輸數據至遠程服務器，以便遠程監控太陽能發電系統的整體性能。

Installing a solar control system is the final and most important step in installing a factory's photovoltaic roof. The main function of the control system is to monitor the overall performance of your solar power generation system and transmit real-time data to remote servers for remote monitoring of the overall performance of the solar power generation system.

六、安全技術

6、 Security technology

在安裝工廠光伏屋頂時，重要的一點是確保過程中的安全技術，以確保安裝現場的安全。太陽能發電系統需在安裝前安裝好儀表、控制箱和斷路器，以及確保安裝現場的空氣濕度低，溫度適中并且維持一個合理的漏電保護系統。

The most important thing when installing factory photovoltaic roofs is to ensure safety techniques during the process to ensure the safety of the installation site. The solar power generation system needs to install instruments, control boxes, and circuit breakers before installation, and ensure that the air humidity at the installation site is low, the temperature is moderate, and a reasonable leakage protection system is maintained.